Description 1. Compared with other similar products, this product uses four-way flat pressure with multiple pressures, precise positioning, avoids capacitors, and is good for CPU fixation; 2. The contact surface with the motherboard is a flat bottom, and LOTES insulation protection pads of the same specification are used to reduce the pressure on the motherboard and further reduce signal interference; 3. The metal side is raised to reduce signal interference on the motherboard side; 4. Anodizing sandblasting is made of whole aluminum alloy with precision, 5. This product only provides support for 12th generation CPU, the motherboard CPU socket is LGA1700 chipset is H610 B660 Z690 series Installation process: 1. Place the motherboard horizontally on the desk and open the CPU clamp 2. Use the included T20 Torx screwdriver to remove the upper part and insert the lower brackets 3. Insert the CPU into the socket 4. Put on the improved buckle on the CPU's upper cover and move it slightly until it clicks into place 5. Tighten the screws halfway on opposite corners. Each screw alternately halfway and a half in diagonal order until the screw is on. will put pressure on the CPU unevenly. Size: 54 x 70 x 6 mm Material: metal Color: red Package contents: 1 x CPU Bending Correction Bracket Fixing Clip 1 x screwdriver Only the above package content, others are not included. Note: Light reflection and different displays may cause the color of the item in the picture to differ slightly from the real thing. The allowed measurement error is +/- 1-3 cm.