Description DMX512 wireless receiver receives standard data from the DMX512 protocol (generated by the console) wirelessly, with no delay when signal data is transmitted reliably. This product uses the 2.4G ISM frequency section. High-efficiency GFSK modulation, communication design, 126 channels of automatic frequency hopping, and high-qualified anti-jamming for reliable performance. 7 group ID codes allow users to operate 7 groups of individual wireless networks without interference in the same location. (Tricolor LED indicators) ID code and LED color correspondence: 1: Red; 2: Green; 3: Green + Red; 4: Blue; 5: Red + Blue; 6: Green + Blue; 7: Red + Green + Blue. User Manual: Press the button for ID setting. Working Condition: LED solid light: No wireless signal. Red LED flashing: Transmitting. Green LED flashing: Receiving. RF Frequency 2400 - 2525G, one of 126 channels with automatic search. ID 1-7 group ID code, press the button for setting; you can only work and receive as the transmitter's ID under the same code. (Same LED color) Set up communication: Turn on the DMX512 wireless receiver card first, then the transmitting card. Press the button to get the same ID value on the transmitting card. Please use different ID values if you need to use more than one group simultaneously in the same location. Red LED flashes when the transmitter is not sending data on any disabled frequency section, then change the receiver's address. Green LED flashes until the same ID value is obtained; the more data, the faster the LED flashes. Communication successfully established. Color: As shown Package List: 1 * Combined Wireless Receiver, 1 * EU Adapter, 1 * Specification (English) Note: Light and different displays may cause the color of the item in the picture to be slightly different from the real one. The allowed measurement error is +/- 1-3 cm.