Features 1、This Air Ion Tester is designed for test high level concentration of negative or positive air ion 2、This instrument can be used to determine whether the negative ion polarity produced by air negative ion generator or air purifier is correct, and the concentration of ion concentration is estimated 3、With it you can estimate whether the air ion generator or air purifier is working in good state 4、Simple and small design, easy to carry, very easy to hang as a necklace 5、Measuring range:10000 ‑‑‑ 19,990,000(ions/cc) Specification Descriptions: This instrument is a qualitative product, rather than quantitative products, because of the accuracy, only suitable for testing values of negative ion air purifiers and negative ion generator, and there are certain floating customers, if you mind, choose others please, thanks. Features: This air ion tester is designed for test high level concentration of negative or positive air ion. This instrument can be used to determine whether the negative ion polarity produced by air negative ion generator or air purifier is correct, and the concentration of ion concentration is estimated. With it you can estimate whether the air ion generator or air purifier is working in good state. Simple and small design, easy to carry, very easy to hang as a necklace Measuring range:10000 --- 19,990,000(ions/cc) Resolution: 10000 (ions / cc) Compact, easy to carry Can show positive and negative ion concentrations For a variety of negative ion generator, air purifier, air conditioning, high concentration of the ion source to measure. LCD display: display value units for the million, the maximum reading 1999 LR44button battery is required(battery not included) The maximum value remains (AITP) AIT (P) ion meter advantages: AIT (P) anion ion gauge is AIT gauge improved, it is the biggest difference between the AIT is the maximum value of the measured air ions remain on the display, it will give the instrument readings more stable, easy to read . Before each measurement to confirm the switch in the "off" position, when you start to make the instrument away from the object, so that its initial reading of zero or close to zero regulation and then slowly close the ion source. It displays the reading will remain until the power is turned off. Usage: 1. Switch to the "ON" position and wait for the product number to be 0. Before the number becomes 0, your fingers cannot touch the upper and lower metal pieces, otherwise it will affect the measured value. 2. keeping the thumb and the square in front of the sheet metal, the metal plate toward the back of the air tested negative ion generator, and tested the closer air anion generator tester readings higher, whereas smaller. Therefore, to ensure the accuracy of the measurement results, leave the meter and test negative ion generator to maintain an appropriate distance. 3. the measurement process, do not touch the metal piece to the back of the instrument, otherwise it would be inaccurate readings. 4. If the reading is not preceded by the measurement symbol is measured positive ions, if the display "-" is negative ion surface. 5. To re-measure should first turn off the power, then restart it. 6. The measurement method textiles: the thumb in contact with the front metal plate, the metal plate toward the back of the textile gently rubbing test, the display will show the ion concentration and to polarity, which can produce ions as the ability of a fabric kinds of important reference. 7. To measure again, you need to shut down and restart, and repeat the above steps. Specification: Power supply: 2 x 1.5V LR44 button battery(built-in) LCD Display: Maximum reading of 1999 Test range is between 1x10000 to 1999x10000 ions/cc Resolution:1x10000 ions/cc Dimensions: 8 x 3 x 1.3cm/3.15 x 1.18 x 0.51inch Weight: 89g Note: 1. This instrument is a-high impedance measuring meter, it must pay attention to moisture when using and collecting, if moisture appeared then testing is unstable, reading disorder and other problems, then the available hair dryer or drying in the sun. 2. When the battery runs low battery symbol appears, it should open the back cover to replace the battery with the specifications and attention battery polarity. 3. If you need to get a more accurate ion content or measured ion content in the environment less than 10,000 (ions / cc) of the following, choose other anion detector please. Package Included: 1x Air Ion Tester 1 x Blue wrist strap Note: The product has 2 built-in button batteries. In addition, four external button batteries are needed, but the four external batteries are not included. Package List