Please note that only one pair of door handles is included, suitable for one door. If you have two shower doors, please order two pairs. This sleek, contemporary curved shower door handle fits doors with holes spaced 145mm (14.5cm) apart and serves as a perfect replacement for a broken handle. Screw caps are included. The handle protrudes approximately 32mm from the glass plane and fits glass doors with hole diameters larger than 7mm. The back-to-back handles are identical on both sides, made of high-quality metal, and compatible with heavy glass doors. Suitable for various shower door types, including sliding and swing doors. Fitting Instructions: Installation is simple and requires only a Phillips cross-head screwdriver—no specialist tools or skills needed. 1. Remove the old handles. If they have concealed caps, locate them on the inner side of the handle and gently pry them out using a small tool such as a pin or needle. 2. Once the caps are removed, unscrew the screws. When removing the second screw, support the outer handle to prevent it from dropping once the screw is fully loosened. 3. Position the new handle by placing the side without external screw holes on the outside of the glass and the side with screw holes on the inside. Align both parts and insert the top screw, leaving it slightly loose for adjustment. 4. Insert the second screw, also leaving it slightly loose initially. Adjust the handle to ensure it is straight, then fully tighten both screws. 5. Test the handle by operating the shower door to confirm stability and secure fit. 6. Once satisfied with the installation, press the screw caps into place to conceal the fixings.