/>Package size: 13*9*2.3cm / 5.1*3.5*0.9in Package weight: 16g / 0.56oz Operation Instruction Normal mode: 1. Press the button for 1s - Mode switch 2. Press the button for 3s - Switch between real mode and AGC mode 3. Press the button for 5s - Enter the speed setting mode 4. Press the button for 10s- Reset 5. Double press on the button - Adjust the brightness of the light bar(low/medium/high, cycle) Speed setting mode: (In normal mode, press the button for 5s to enter, press the button for 5s again to exit.) 1. Press the button for 1s a. The rising speed of the light bar(15 optional) b. The falling speed of the light bar(15 optional) c. The holding time of the peak(15 optional) d. The falling speed of the peak(15 optional) e. Zoom in / out in dB mode(15 optional, 80%-120%) f. Brightness adjustment (15 optional) Loop in these functions 2. Press the button - Change the setting parameters in loop Display Effect 1. Strip display + falling after the holding of the peak 2. Strip display + disappearing after the holding of the peak 3. Strip display + no displaying of the peak 4. Strip display + flowing toward right and disappearing of the peak 5. Strip display + 2 segment light 6. Strip display + 1 segment light 7. Strip display + the peak rolling back and forth 8. Strip display + falling of the peak after its right jumping 2 lights Note: Diy electronic kit only, other accessories in the pictures are not included. Due to manual measurement, there may be deviation, please in kind prevail. Due to lighting or other reasons, the picture and material object may slightly differ. Packing List: 1 * Mainboard 2 * LED Module 1 * 4-pin Socket 1 * 4-pin Wire