MPREHENSIVE VEHICLE COVERAGE Installation Process: 1. Loosen the tire: Remove the valve cap and core and deflate the tire. <br> <br> 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation . Insert the tire tool and lift the tire bead onto the mounting to discount the . <br> <br> 3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. <br> <br> 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. <br> <br> 5. Mount the tire: Place the tire on the rim, making sure that the valve the separation at an angle of 180 degrees. Mount the tire over the rim. <br> <br> No sensor programming Required: The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". <br> <br> Simplified Relearn: AUTO Relearn Installation of TPMS is recommended to be performed only by trained . <br> <br> Part Number:15122618 <br> <br> Fit Car: <br> <br> For (from 2003-11 to 2014-03) <br> <br> For (from 2003-11 to 2013-12) <br> <br> For H3(from 2005-05 to 2011-07) <br> <br> For H3T(from 2008-06 to 2010-07) <br> <br> For I-Series(from 2005-07 to 2008-08) <br> <br> For Montana SV6(from 2009-01 to 2009-11) <br> <br> Colour: black <br> <br> Material: ABS <br> <br> Package Contents: <br> <br> 4 x Tire Pressure Sensor <br> <br> Only the above package content, other products are not included. <br> <br> Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.