Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: +/-10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Operating Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Power Supply Voltage: 24-240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components Cleans the compressed air system during installation Note the direction when installing the valve: outlet should not use hose and must avoid air impact Power supply voltage must match the drain valve voltage: when using DC, connect to terminal "1" When leaving the drain valve connected to the cable, brown is live (L), blue is neutral (N), yellow-green is safety ground (GND) Be sure to tighten the long screw on the terminal box to prevent water ingress Warning: When installing the electronic drain valve, ensure that: Compressed air has been fully discharged (system is not under pressure) The power supply has been switched off Color: Gold + Black Material: Metal Size: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Only the above package content is included; other items are not included Note: Lighting and display differences may cause slight color variation between the image and the actual item. Measurement error allowed is +/- 1-3 cm