GetCoupons Now! Description: Replace For Part Number: 1862980EV6T-1A180-CB EV6T-1A150-CBEV6T-1A180-DBEV6T-1A150-DB EV6T-1A180-DC Operating Frequency:433MHz Package Content:1 / 4 TPMS SENSOR Application: For Ford B-MAX (JK8)(from 2014-03 to 2018-04)For Ford C-Max (DXA)(from 2014-03 to 2019-12)For Ford Ecosport (JK8)(from 2014-10 to 2017-12)For Ford F-150(from 2014-03 to 2015-03)For Ford F-150(from 2015-04 to 2021-04)For Ford Fiesta Van(from 2014-03 to 2017-07)For Ford Fiesta VI(from 2014-03 to 2017-04)For Ford Focus III(from 2014-03 to 2018-08)For Ford F-Series(from 2014-03 to 2015-07)For Ford F-Series(from 2015-08 to 2021-04)For Ford Ka+(from 2016-06 to 2020-12)For Ford Kuga(from 2014-03 to 2020-06)For Ford Mondeo (MK5)(from 2014-10 to 2017-08)For Ford Ranger(from 2014-03 to 2022-09)For Ford Tourneo Connect(from 2014-07 to 2018-02)For Ford Tourneo Courier(from 2014-10 to 2022-04)For Ford Transit Connect(from 2014-03 to 2018-02)For Ford Transit Courier(from 2014-10 to 2022-04) Note: 1.If you can not make sure which item fit for your car,please send theVIN CODEto us confirm it before order. 2.No sensor programming Required: The Tire Preure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning". Simplified Relearn :OBDIIrequired *Installation of TPMS is recommended to be performed only by trained profeionals. 3.Installation Proce . Loosen the tire: Remove the valve cap and core and deflate the tire. .Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. .Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. .Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Aemble the sensor body against the rim and tighten the screw. .Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.