The Vehicle Loop Detector is designed to detect the presence and passage of vehicles. It features a reset switch that allows manual resetting during commissioning and testing, enabling the detector to re-tune the sensing loop and prepare for vehicle detection. Selectable pulse time allows the pulse relay to be energized for either 1 second or 0.5 seconds. The pulse relay can be configured to activate upon vehicle detection or when a vehicle exits the loop. Sensitivity boost sets the detection level to maximum sensitivity, helping prevent missed detections of high-bed vehicles. Switch-selectable sensitivity offers four levels for flexible configuration. Four frequency settings are available to minimize interference between adjacent loops. A filter option provides a delay between vehicle detection and output relay activation, helping prevent false triggers from small or fast-moving objects. The permanent presence feature ensures continuous detection when a vehicle remains over the loop for extended periods. Specifications: Supply voltage: 220V AC Power: 4.5VA Output relays: 240V/5A Operating temperature: -20°C to 65°C Storage temperature: -40°C to 85°C Frequency range: 20 kHz to 170 kHz Temperature compensation: 50°C/h Reaction time: 10ms Signal holding time: Unlimited or limited Sensitivity: Higher: 0.02%, High: 0.05%, Low: 0.1%, Lower: 0.5% Loop inductance: Total loop plus connection wiring: 50μH to 1000μH (ideal range: 100μH to 300μH) Loop connection wiring: Up to 200 meters in length, total resistance less than 80 ohms, twisted at least 20 times per meter Relative humidity: Less than 90% (non-condensing)