Experiment Electric Bell, Vertical Acoustics Demonstration Teaching Tools for Classroom Laboratory

259,00 kr
gratis leverans

Experiment Electric Bell, Vertical Acoustics Demonstration Teaching Tools for Classroom Laboratory

  • Märke: Unbranded
Säljs av:

Experiment Electric Bell, Vertical Acoustics Demonstration Teaching Tools for Classroom Laboratory

  • Märke: Unbranded

259,00 kr

Spara 150,00 kr (36%)

RRP

409,00 kr
I lager
gratis leverans
Säljs av:

259,00 kr

Spara 150,00 kr (36%)

RRP

409,00 kr
I lager
gratis leverans

Vi erbjuder följande betalsätt

Beskrivning

Features Better Learning: Electric bell is used in school physics teaching to explain and demonstrate the mechanism and working principle of DC electric bells. Combined with the air extraction device, it can also be used for air sound transmission experiments. The Using Tips: The voltage should not be too high and the continuous power on time should not be too long. If the contact point of the vibration fragment is in poor contact with the contact screw, the oxide layer on it can be wiped off with sandpaper. How to Store: The electric bell has been debugged and inspected before leaving the factory. Do not disassemble or move the parts randomly. After use, please put it back into the box and place it in a dry and non corrosive gas place. Simple Operation: Connect the two terminals to a 4‑6V DC power supply with a wire, connect the power supply, and the bell will sound. The Adjustment: During the experiment, if the vibrating shrapnel does not work properly, the distance between the contact screw and the shrapnel can be adjusted to allow it to contact and leave normally. 1. Better Learning: Electric bell is used in school physics teaching to explain and demonstrate the mechanism and working principle of DC electric bells. Combined with the air extraction device, it can also be used for air sound transmission experiments. 2. The Using Tips: The voltage should not be too high and the continuous power on time should not be too long. If the contact point of the vibration fragment is in poor contact with the contact screw, the oxide layer on it can be wiped off with sandpaper. 3. How to Store: The electric bell has been debugged and inspected before leaving the factory. Do not disassemble or move the parts randomly. After use, please put it back into the box and place it in a dry and non corrosive gas place. 4. Simple Operation: Connect the two terminals to a 4‑6V DC power supply with a wire, connect the power supply, and the bell will sound. 5. The Adjustment: During the experiment, if the vibrating shrapnel does not work properly, the distance between the contact screw and the shrapnel can be adjusted to allow it to contact and leave normally. Specification: Item Type: Experiment Electric Bell Material: ABS Working Voltage: DC 3-6V Resistance: The electromagnetic iron coil has a DC resistance of 10-20 Ω. Sounds: When the electric bell is working, the ringing tone is clear within a range of 15M. Work Environment: Environmental Temperature: -10-40℃ Relative Temperature: No more than 85%. PackageList: 1 xExperiment Electric Bell Package List 1 x Experiment Electric Bell
  • Fruugo-ID: 400247405-851781630
  • EAN: 9301540542328

Produktsäkerhetsinformation

Se produktsäkerhetsinformationen som är specifik för denna produkt som beskrivs nedan

Följande information tillhandahålls av den oberoende tredjepartsåterförsäljaren som säljer denna produkt.

Produktsäkerhetsetiketter

CE Mark
Säkerhetsvarningar: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
Ingredienser: As shown in the figure

Leverans och returer

Skickas inom 2 dagar

  • STANDARD: GRATIS - Leverans mellan kl fre 31 oktober 2025–tors 06 november 2025 - GRATIS

Leverans från Kina.

Vi gör vårt bästa för att säkerställa att produkterna du beställer levereras kompletta och enligt dina specifikationer. Om du däremot skulle ta emot en ofullständig beställning, eller andra artiklar än de du beställt, eller om det finns någon annan anledning till att du inte är nöjd med din beställning, kan du returnera beställningen, eller valfria produkter som ingår i beställningen, och få fullständig ersättning för artiklarna. Visa fullständig returpolicy

Produktöverensstämmelsedetaljer

Vänligen se överensstämmelseinformationen som är specifik för denna produkt som beskrivs nedan.

Följande information tillhandahålls av den oberoende tredjepartsåterförsäljaren som säljer denna produkt.

Tillverkare:
Följande information beskriver kontaktuppgifter för tillverkaren av denna produkt som säljs på Fruugo.

  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • NO,606-23-220,MeinianGuojiGuangChangZhaoshangJiedaoNanHaidadao yixiShenzhenGuangdong
  • Shenzhen
  • CN
  • 518000
  • GoodLuck856@163.com
  • 8613164761511

Ansvarig person i EU:
Följande information innehåller kontaktuppgifter för den ansvariga personen i EU. Den ansvariga personen är den utsedda ekonomiska aktör i EU som ansvarar för att skyldigheterna uppfylls för denna produkt som säljs till Europeiska unionen.

  • SINO-SEAR GmbH
  • SINO-SEAR GmbH
  • Feuerbachstrasse 11, 14471 Potsdam, Germany
  • Potsdam
  • DE
  • 14471
  • info@sino-sear.com
  • 4933195130908