Altax colorless wood oil 075l Protective oil for wooden surfaces is a reliable, efficient preparation for protecting wooden elements It is also suitable for impregnating exotic wood Oil is a wood impregnation agent containing natural ingredients It is an extremely easy and quick to use preservative which should be used regularly throughout the season It can be used on raw wood or wood already protected with oil It impregnates and deeply saturates the wood and also prevents it from graying Advantages and product features Provides long-lasting protection against UV radiation and unfavorable weather conditions Ideal for exotic wood High-quality resins and waxes prevent the product from peeling or cracking, making renewing the protection extremely easy It is easy to apply, does not drip, does not run and spreads very well Based on linseed oil, it prevents the wood from graying The product has a delicate, non-irritating scent and is safe for people and animals AQUABLOCK hydrophobic formula means that water drops do not penetrate the wood but run off on its surface Penetrates deeply into the wood and strengthens its structure Preparation The wood must be raw, clean and dry Lightly sand raw wood with fine-grained sandpaper and then remove dust Wood covered with a layer of varnish, remove the old coating mechanically or chemically. Finally, lightly sand with 120-grit sandpaper and remove dust Old, previously oiled wood, clean, sand with sandpaper and then remove dust Application Shake the container well before use Apply the oil to small surfaces with a brush or a cotton cloth The first layer should be applied generously so that the oil can penetrate deeply into the wood After a maximum of 30 minutes, remove excess oil with a cotton cloth and let it dry Observe the surface during oiling to prevent the oil layer from drying on the wood. In case of high temperature and sunlight, the oil dries faster and it may be necessary to remove the excess beforehand to prevent the formation of a film After a minimum of 3 hours, apply the second layer of oil in the same way and after a maximum of 30 minutes, remove it again and let it dry excess Leave the surface to harden and dry for 24 hours Perform a water drop test on the protected surface. To do this, apply a small amount of water to the surface. If it does not penetrate the wood, it is sufficiently protected. Otherwise, apply an additional layer of oil Parameters Brand Altax Color Colorless Capacity 075l Package yield approx. 13m2L Drying time between coats min 3h Total drying time 12h Tools Brush or cloth Cleaning tools White spirit Recommended layers 2 Waterproof protects against UV rays and unfavorable weather conditions Application Protects against weather conditions and decorates terrace wood The price is for one piece