For NanoPi NEO Air is an source wireless maker board with a size of only 40x40mm. Allwinner's H3 -core A7 main control is used, the highest operating frequency can reach 1.2Ghz, the pins are compatible with NanoPi NEO (wired network version, V1.2), and compatible with 24pin GPIO. For NanoPi NEO Air is equipped with 512M DDR3 memory, standard 8GB eMMC high-speed flash memory, integrated AP6212 WiFi Bluetooth module, supports microSD card to start the . With YUV422 parallel camera interface, it can support up to 500W pixel CMOS camera sensor. For NanoPi NEO Air adopts a more professional design, adopts 6-layer board wiring, and has good heat dissipation characteristics. CPU: Allwinner H3, -core -A7 Up to 1.2GHz Memory: 512M DDR3 RAM Storage: 8GB eMMC WiFi: 802.11b/g Bluetooth: 4.0 dual mode MicroSD Slot: x1 MicroUSB: OTG and power input Debug Serial Port: 4Pin, 2.54mm pitch pin header GPIO1: 2.54mm spacing 24pin, It includes UART, SPI, 12C, GPIO; GPIO2: 2.54mm spacing 12pin, It includes USBx2,IR, SPDIF, I2S; PCB Layer: 6 Power Supply: DC 5V/2A OS/Software: u-, UbuntuCore Size: 40 x 40mm Material: PCB Color: Blue Package Contents: 1x Development Board 1x 12x2pin Double- Pin Header 1x 12pin Single- Pin Header 1x 8pin Single- Pin Header 1x Antenna