FV-200Hz10V Frequency Voltage Converter Module, 0~200hz to 0~10V Digital to Analog Signal Module Power Converter 3BDO3

189,00 kr
gratis leverans

FV-200Hz10V Frequency Voltage Converter Module, 0~200hz to 0~10V Digital to Analog Signal Module Power Converter 3BDO3

  • Märke: Unbranded
Säljs av:

FV-200Hz10V Frequency Voltage Converter Module, 0~200hz to 0~10V Digital to Analog Signal Module Power Converter 3BDO3

  • Märke: Unbranded

189,00 kr

Spara 150,00 kr (44%)

RRP

339,00 kr
I lager
gratis leverans
Säljs av:

189,00 kr

Spara 150,00 kr (44%)

RRP

339,00 kr
I lager
gratis leverans

Vi erbjuder följande betalsätt

Beskrivning

Features Convert Signal: The converter module is to convert 0~200hz digital signal into 0~10V analog signal. If you need to use PLC, support NPN type. Must have a ground wire. Applicable: The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter. Excellent Performance: Input pulse level of 5/12/24V can be directly input without resistance.But input signal frequency should maintain more than 0.5 seconds. Premium Material: The frequency to voltage converter module is made of high quality material, durable and has long service life. Professional Tools: The power converter has professional and practical design which is for premium working performance. Specification: Item Type: Frequency to Voltage Converter Module Size:4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in Relationship,Linearity: 20Hz to 1V 100hz to 5V 200hz to 10V Package List: 1 x Converter Module Note: 1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage. 2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Power converter. At 24 levels, the power supply needs to be powered by 24VDC 3. The signal input end is isolated by diaphragm. Guaranteed anti-interference ability. 4. If you need to use PLC, support NPN type. Must have a ground wire. 5, if you need to use the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds. 6, frequency and voltage conversion module, response time is about 0.3-0.5 seconds. 7. If the signal input is turbine flow, etc., due to signal matching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function. 8. Correspondence in use If there is a deviation, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we have adjusted the F/v potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself. Package List
  • Fruugo-ID: 383722740-825932079
  • EAN: 9789622116801

Produktsäkerhetsinformation

Se produktsäkerhetsinformationen som är specifik för denna produkt som beskrivs nedan

Följande information tillhandahålls av den oberoende tredjepartsåterförsäljaren som säljer denna produkt.

Produktsäkerhetsetiketter

CE Mark
Säkerhetsvarningar: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
Ingredienser: As shown in the figure

Leverans och returer

Skickas inom 2 dagar

  • STANDARD: GRATIS - Leverans mellan kl mån 03 november 2025–fre 07 november 2025 - GRATIS

Leverans från Kina.

Vi gör vårt bästa för att säkerställa att produkterna du beställer levereras kompletta och enligt dina specifikationer. Om du däremot skulle ta emot en ofullständig beställning, eller andra artiklar än de du beställt, eller om det finns någon annan anledning till att du inte är nöjd med din beställning, kan du returnera beställningen, eller valfria produkter som ingår i beställningen, och få fullständig ersättning för artiklarna. Visa fullständig returpolicy