The output of the AO2 sensor changes with temperature, but the thermistor is gradually integrated to compensate for these changes. The thermistor helps provide the AO2 with a stable output over a wide temperature range. The AO2 PTB-18.10 oxygen sensor used in the oxygen index meter is a consumable item. When exposed to air, a chemical reaction begins. AO2 Product Parameters: (1) Output: 9–13 mV in air (2) Range: 0–100% O2 (3) Accuracy: 0.01% O2 (4) Expected service life: 360,000% O2 hours at 20°C, 286,000% O2 hours at 40°C, or two years in air at STP (5) T90 response time: Less than 5 seconds (6) T99.5 response time: Less than 40 seconds (7) Signal in 100% oxygen: 100 ± 1% (8) Linearity: 0–100% O2 (9) Zero offset: Less than 20 µV (10) Temperature range: -20°C to +50°C (11) Temperature compensation: Less than 2% variation from 0 to 40°C (12) Differential pressure range: 0–500 mbar maximum (13) Absolute pressure range: 500–2000 mbar (14) Relative humidity range: 0–99% non-condensing (15) Long-term output drift: Less than 10% signal loss per year (16) Recommended load resistance minimum: 10 kΩ Note: Due to different production batches, the product appearance may vary slightly; this does not affect performance. Color: Red Material: Plastic Package Contents: 1 × Oxygen Sensor Only the above package content is included; other products are not included. Note: Light reflection and differences in display screens may cause slight variations in the color of the item shown in the picture compared to the actual product. Measurement error allowance: ±1–3 cm.