Welcome to our shop! Description: - High temperature arc igniter with 6-12v high power. It can instantly ignite cigarette paper and can work continuously for 20 seconds. It has a high frequency and good quality, making it easy to use. - It can be used as a high voltage source for high school science experiments, electronic instruments, negative ion generators, and other scientific purposes. - It can generate high temperature and high frequency arcs, making it easy to ignite combustible materials. - Based on the Tesla coil principle, the module outputs high voltage pulse current. It has a small size and high efficiency. - The peripheral circuit is simple, just connect the switch and install the battery. The discharge intensity is violent. Specifications: - Size: Approx. 55 x 24 x 22mm / 2.2 x 0.9 x 0.9in - Input voltage: 6V-12V - Input Current: 0.5A-2A (depending on the input voltage) - Input line length: about 10cm/3.94inch - High Voltage type: DC type - Output voltage: about 80KV (please pay attention to safety when used) - Output current: 0.5A - Output line length: about 10cm/3.94inch - High voltage poles ignition distance: ≤1.5cm (1.5cm is maximum distance, 1cm is better) Note: 1. Please ensure the power is between 6-12v. The module can produce a 1.5cm length purple high temperature arc, instantly igniting paper. The high voltage line can also discharge on any metal body without making a crack sound. 2. For input power, you can use a 3.7-v lithium battery (such as 18650 battery or idle cell phone battery without the protection board) or Nickel-cadmium/Nimh battery pack. 4V or 12V lead-acid batteries (12V battery works best). Module Usage Precautions: 1. Avoid powering on when there is no load. Adjust the appropriate distance for the high-voltage terminal before powering on. The arc distance is proportional to the battery voltage and capacity. 2. Test the arc distance from short to long during experimentation. Do not exceed the maximum arcing distance (≤1.5cm, 1cm is recommended). Exceeding the distance can lead to energy not being released properly and may damage the module. 3. The module's internal heat dissipation is not efficient, so it is not suitable for long-term continuous operation. 4. To determine whether the battery capacity can drive the maximum output power, measure the battery voltage when in the arc state. 5. Small capacity series lithium batteries have a voltage drop when arcing. It is recommended to use lithium batteries with a capacity above 2000mAh, preferably above 4000mAh. Package Included: 1 x High Voltage Pulse Generator Note: 1. The power time should not exceed 20 seconds each time. Since the output power is strong, it must be driven by a rechargeable battery or storage battery. Improper voltage and long work duration can easily damage the high voltage module. Be cautious when testing and using it. 2. Keep the ignite distance within 1cm. 100% Satisfaction: Our customers are our top priority. If you find any product problems after receiving the goods, such as damage and incorrect quantity of goods, please contact the seller immediately. We try our best to provide you with satisfactory after-sales service.