Function Remote anti-theft Press the lock key on the remote control once; the direction indicator flashes once and the horn sounds once to enter the anti-theft state. The vibration sensor is activated, and the motorcycle engine enters a lockout state, preventing the vehicle from starting. Remote control release Press the unlock key on the remote control once; the direction indicator flashes twice and the horn sounds twice to deactivate the anti-theft system. Manually open the vehicle key to start normally. Silent anti-theft Press the mute key on the remote control once; the turn signal flashes once and the horn sounds once. Press the mute key again after three seconds; the turn signal flashes once without a horn sound, and the system enters silent anti-theft mode. If a vibration alarm is triggered, the direction indicator flashes without a horn sound. Remote vehicle start Press the mute key on the remote control twice to start the motorcycle engine immediately. The vehicle can be driven without manually using the key. During remote start operation, press the mute key once to remotely turn off the engine. Remote search Press and hold the search key on the remote control for 2.5 seconds; the direction indicator flashes five times and the horn sounds five times to locate the vehicle. Specifications Voltage: 12V ± 2V Static current: less than 15mA Frequency: 433.92MHz Code: learning code Operating distance: approximately 60-80m Remote control battery: CR2016 6V (not included) Compatibility: For use with 12V motorcycles, suitable for AC starting models. APP and remote control pairing: Open the motorcycle APP. A prompt will appear. Turn on the mobile phone's Bluetooth switch. A green dot on the Bluetooth icon indicates it is active. Tap the gear icon in the top right corner of the interface to enter the settings. Press the learn code key once, then simultaneously press two keys on the remote control once.