OEM LCD Screen with Digitizer Full Assembly Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Be aware of static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static electricity from damaging internal electronic components. Wear eye protection and handle with care to avoid injury from glass splinters. Tip 2: Simulated testing Screen replacement is a fragile component. We strongly recommend testing before full installation. Perform simulated testing by connecting the motherboard and new LCD/screen assembly via the display cable, powering on the device, and verifying functionality. If the test is successful, proceed with installation. If the screen does not display, immediately. Do not force installation into the device. We are not responsible for damage occurring after installation. Tip 3: Avoid over-bending the cable Ensure the LCD cable is not bent beyond 90 degrees, as excessive bending may cause a black display. About the product 1. LCD display and touch screen digitizer assembly replacement part 2. Replace your broken or non-functional screen with a new one 3. Restore your device’s appearance 4. Designed for precise fit and full functionality 5. Each unit is inspected and verified in good condition prior to shipping 6. Professional installation is highly recommended. We are not responsible for damage occurring after installation.