LCR-TC1 Colorful Display Multi-functional TFT Backlight Transistor LCR-TC1 Tester 1.8 inch for Diode Triode Capacitor Resistor LCR-TC1 Features: It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc. It can also be used to detect infrared wave forms. It also can detect zener diode and has the function of self-calibration. After detection, align the infrared remote control with the "IR" light, then pre the button in the remote control, if the detector succefully decode it, it will display the data code and infrared wave form. One button operation, automatically detect and shutdown, and you can pre the multi-functional button to close the detector too. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Not like the usual black and white display, this detector will show results in color. Specification: - Color:White - Size:69*91*28mm/ 2.71x3.58x1.10 inch - Display:1.8inch TFT Screen, Color Screen - Diode Range:le than 4.5V - Zener Diode:Transistor Detect Area: 0.01-4.5V - Zener DiodeDetect Area: 0.01-30V - Triac Range:IGT le than 6mA - Capacitance:25pF-100mF - Resistor:0.01-50M - Inductance:0.01mH-20H - Power Voltage:3.7V - Power:Built-in Rechargeable Lithium Battery -Display:1.8 inch TFT screen -Bettery:0.1-4.5V Package Included: 1* Multi-functional TFT Transistor Tester 1*Electronic Component Set 1*Cable 3*Test Hook