Wind Generator Controller 12/24V 800W MPPT Wind Charge Controller for Wind Turbine System Automatically charges the battery. The controller features an integrated rectifier and brake circuit module, offering improved heat dissipation and reliability compared to traditional designs. Designed with a fully sealed, waterproof structure, achieving an IP67 protection rating, allowing for long-term normal operation even when submerged in water. Important: Ensure the wind turbine generator output voltage matches the battery rated voltage. Connect wiring in the correct sequence: first connect the battery's positive and negative terminals to the controller, then connect the wind turbine's three-phase output. Follow all instructions carefully when connecting the battery and wind turbine to the controller. Reversed polarity or incorrect connections may result in system malfunction or permanent damage to the controller. Wiring Instructions: 1. Connect the battery's positive and negative terminals to the corresponding red (positive) and black (negative) battery terminals on the controller. 2. Connect the wind turbine's three-phase output wires to the three-phase input terminals (green wires) on the controller. Specifications: - Maximum input AC voltage: AC35V - Output voltage: 12V / 24V - Battery charging cut-off voltage: 14.5V ± 0.3V / 29V ± 0.3V - Maximum charging current: 15A (12V), 10A (24V) - Wind generator speed limit voltage: 14.5V ± 0.3V / 29V ± 0.3V - Protection level: IP67 - Static power consumption: 0.008A - Maximum load power: 800W - Maximum allowable wind speed: 12 m/s - Operating temperature range: -35°C to 65°C - Input wiring: Three-wire system - Control mode: Auto-detect 12V/24V compatibility - Installation: Bolted mounting - Do not reverse positive and negative connections to prevent controller damage Application: Suitable for small-scale wind power systems Product Color: Blue Material: Aluminum alloy Package Includes: 1 x MPPT Wind Generator Controller Note: Other items not included. Color may vary slightly due to lighting and display differences. Measurement tolerance: ±1-3cm.