NEONAIL Nail Drill NN S12 Nail Drill NN S12 The perfect shape of the plate, perfectly cut skins and carefully removed hybrid varnish? It is possible thanks to this nail milling machine. Use it during manicure and pedicure treatments, and your work will become even more comfortable and effective - it is also perfect for acrylic and gel masses. You can use the milling machine both at home and in a beauty salon. What will you love the milling machine for? 1. Convenience during use: the speed you adjust with the regulator, the maximum rotation speed is 30,000 rpm. 2. Innovative solutions: changing the direction of rotation to the right or left, turning the device on using a switch or foot switch, simple mounting of the cutters - just turn the movable part of the handle to the left, remove the cutter, insert the next one and turn it to the right. 3. Minimalist design: a small, shapely milling machine does not take up much space, the device is very aesthetic and has a designer look. Operation of the device in a few steps: Connect the handle of the router to the plug on the machine. Turn on the router using the ON / OFF or Foot switch. Change the direction of rotation with the FWD / REV switch. Set the rotation speed of the MIN / MAX regulator. Data: smooth speed control in the range from 0-30 thousand. turnover, ergonomic housing, two directions of rotation - left and right, switch with a foot pedal and in the base, made of the highest quality materials, intuitive operation, protective system - anti-overvoltage, 2 places for the handle - on the milling machine and stand, high-quality diamond cutters with abrasive cylinders for pedicure, thanks to overlays that perfectly wear off, working with it is easy and pleasant. Parameters: power: 12 W, power supply: 220-240 V / 50 - 60Hz, device weight: 630 g, device dimensions: 117 x 154 x 72 mm, handle weight: 130 g, handle length: 131 mm. max. rotary: 30,000 rpm A set of 6 cutters 6 bits: Conical stone - used for sawing and shortening as well as removing cuticles. Fine to medium blades are used to clean the underside of acrylic and gel nails. Downward tapered cones can be used with very short nails. Metal ball cutter - used to remove cuticles from the nail roll. Shield stone - is used to shape the end of natural and artificial nails. Roller stone - mainly used on the surface of the nail. Medium and sharp cutters are used to file off the old acrylic and gel mass, while preparing for filling up or modeling a new nail from the mass. Metal cylindrical cutter - used to remove the callous skin of the feet and hands. Mandrel - a carrier for paper overlays. Paper overlays - used for pedicure, they easily remove callous epidermis. They are also used to remove hybrid varnish. warranty card manual user instructions Milling machine base: Weight: 630 g Input voltage: 220-240V AC Frequency: 50/60 Hz Output voltage: 12 V DC Output power: 12 W max Milling handle: Weight: 130 g Max. turnover: 30,000 rev. / min Device operation: • Plug the power cord plug into the socket; • Connect the handle of the router to the plug on the device; • Turn the device on / off using the ON / OFF switch; • You set the change of the rotation direction using the FWD / REV rotation direction switch; • The rotation speed can be adjusted up to a maximum of 30,000 rpm with the SPEED speed regulator. SPECIAL NOTES: Before using, read the manual - it contains all the information and technical parameters regarding the milling machine. For professional use only. Please read the directions for use carefully. Keep away from children.