Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

849,00 kr
+ 66,99 kr Leverans

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Märke: Unbranded
Säljs av:

Oxygen Inhaler Wall Entry Buoy Type Filter Flow Meter 1~15L/min

  • Märke: Unbranded
Pris: 849,00 kr
Säljs av:
849,00 kr
+ 66,99 kr Leverans

I lager

Vi erbjuder följande betalsätt

Beskrivning

Oxygen Inhaler Wall Entry Buoy Type Oxygen Filter Flow Meter Meter Oxygen Supply Parts Item Type: Oxygen Inhaler Flow Range: 1~10L/min, 1~15L/min Input and Output: 0. 4MPa~0.5MPa Exhaust Pressure of Safety Valve: 0.17MPa±0.05MPa How e:1. When using the inhaler, fill the inhaler bottle with distilled water first. It is forbidden to replace it with physiological saline. The water level in the inhaler bottle is between the upper and lower water levels. Tighten the inhaler bottle. 2. Before inserting the inhaler into the oxygen supply terminal socket, turn off the flow adjustment switch, and then insert the quick plug into the oxygen supply terminal socket hole. When you hear a "click" sound and see the oxygen supply terminal socket locking sleeve automatically slides , It means that the quick plug and the oxygen supply terminal socket have been connected and locked 3. Before supplying oxygen, insert the oxygen inhalation tube (purchased separately) into the oxygen supply connector, and then turn the flow adjustment switch counterclockwise to turn on the air source to make the float rise slowly (the scale line aligned with the center of the float is the flow reading, unit Is liters/min), the oxygen supply can be adjusted as needed 4. During the oxygen supply process of the inhaler, if the water in the inhaler bottle is lower than the water line, the flow adjustment switch should be closed in time, the humidification bottle should be unscrewed, and distilled water should be added according to the requirements of Article 1 of this item. Screw on the body of the inhaler and continue oxygen supply. 5. When the inhaler is out of use, the air source of the inhaler should be turned off; if it needs to be removed, hold the inhaler with one hand and unlock it with the other hand and then remove it (the unlocking method of the different oxygen supply terminal sockets is explained by the engineering installation unit ). Then pour out the water in the bottle for cleaning and disinfection, and store it in a non-corrosive gas and well-ventilated room.
  • Fruugo-ID: 413728961-874299789
  • EAN: 4081337801405

Leverans och returer

Skickas inom 24 timmar

  • STANDARD: 66,99 kr - Leverans mellan kl tors 16 oktober 2025–fre 24 oktober 2025

Leverans från Kina.

Vi gör vårt bästa för att säkerställa att produkterna du beställer levereras kompletta och enligt dina specifikationer. Om du däremot skulle ta emot en ofullständig beställning, eller andra artiklar än de du beställt, eller om det finns någon annan anledning till att du inte är nöjd med din beställning, kan du returnera beställningen, eller valfria produkter som ingår i beställningen, och få fullständig ersättning för artiklarna. Visa fullständig returpolicy

Produktöverensstämmelsedetaljer

Vänligen se överensstämmelseinformationen som är specifik för denna produkt som beskrivs nedan.

Följande information tillhandahålls av den oberoende tredjepartsåterförsäljaren som säljer denna produkt.

Tillverkare:
Följande information beskriver kontaktuppgifter för tillverkaren av denna produkt som säljs på Fruugo.

  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • shenzhenshijiangjunfudianzishangwuyouxiangongsi
  • BantianjiedaoxiangjiaotangshequzhonghaogongyechengC2dongwuceng505
  • Longgangqu
  • Shenzhenshi
  • Guangdongsheng
  • China
  • 518000
  • Wallace22578@outlook.com
  • +8613084447403

Ansvarig person i EU:
Följande information innehåller kontaktuppgifter för den ansvariga personen i EU. Den ansvariga personen är den utsedda ekonomiska aktör i EU som ansvarar för att skyldigheterna uppfylls för denna produkt som säljs till Europeiska unionen.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM.1.PLANTA 1,DERECHA.OFICINA3.Fuenlabrada.
  • Madrid
  • Spain
  • 28947
  • successservice2@hotmail.com
  • +34910602659