Feature: 1. [2 SIDE COATING] The steel plate has double sided coating, one side is gold powder, the other side is smooth PEI, which can meet more printing requirements. 2. [EASY OPERATION] Just put the flexible steel plate on the hot bed of the 3D printer to use, with convenient and safe operation. 3. [STANDARD SIZE] The size of the steel plate is 355 x 355mm, which can be used for the same size building plate, suitable for Voron 350 V2 model. 4. [SPRING STEEL] The flexible steel PEI board is made of high quality spring steel, which has good bending resistance and is not easy to kink or warp. 5. [EASY TO FALL OFF] When the temperature of the heating bed reaches room temperature, the printed part will easily fall off the surface. Specification: Item Type: Flexible Steel Plate Material: Steel Color: Black Product Size: Approx. 355 x 355mm / 14 x 14in Applicable Model: For Voron 350 V2, for Voron V2.4 Print Reference Temperature: Material Hot Bed Nozzle Description PLA 50-60℃ 200-210℃ Support Both Sides. ABS 70-120℃ 240-250℃Powder side is recommended. After the temperature of the smooth surface exceeds 80℃, the surface is easy to foam PETG 60-85℃ 230-245℃ Support Both Sides Carbon Fiber 50-60℃ 200-220℃ Support Both Sides. Close to PLA, hardened steel nozzle is recommended TPU 50-60℃ 200-220℃ Support Both Sides Wood 50-60℃ 200-220℃ Support Both Sides. Close to PLA . Package List: 1 x Steel Plate1 x Magnetic Sheet Note: 1. The steel plate is elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the platform and wear out the sprinklers.3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gaps between the nozzle and the steel plate should be about a piece of A4 paper.4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.5. Add a skirt when printing a model with a small contact surface.