Taiwan FC1307A, JM20330 solutions Compatible with DOS, WINCE, WIN98/xP/VISTA/NT, WIN7/8/10 and LINUx operating systems Equivalent to flexible plugging and unplugging of SSD for industrial purposes, using SD as a mobile hard disk to realize flexible movement of data storage Supports RAID 0 use of two SD cards, that is, the capacity of the two SD cards is added. It is recommended to use the same model and performance SD. It is also possible to use a single card in the first SD position After the hard disk is transferred, it can be used as a system boot disk or a data disk SD supports high-speed cards So far, a single SD card supports a maximum of 128GB (2 blocks of 256GB), and there is no upper limit in theory. Use large capacity SD, please sample before purchasing Support SATA GEN1, GEN2, the maximum data transfer rate is 150MB/s, 300MB/s respectively Supports edge openings. SD mobile storage can be realized by opening a slot on the user's device chassis directly opposite the SD card slot. Working with the BIOS and operating system, it can support SATA and SD hot-swap, plug and play, and can be used without any driver. When hot-swapping the SD card, pay attention to the coordination of the BIOS, operating system, and applications. Do not hot-plug when reading and writing data to avoid data loss. Under normal circumstances, it is recommended to cold-swap to achieve mobile storage of data. Size: The bare board is compatible with 2.5-inch hard drive size. Can be used directly on a laptop without causing positional interference 2 SD to SATA large boards Colour:Green Material:PCB Package Contents: 1x SSD Converter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.