V5 V6 Cnc 40mm 3d Touch Probe Edge Finder To Find The Center Desktop Cnc Probe Formach3 And Grbl Gr

2 299,00 kr
+ 117,49 kr Leverans

V5 V6 Cnc 40mm 3d Touch Probe Edge Finder To Find The Center Desktop Cnc Probe Formach3 And Grbl Gr

  • Märke: Unbranded

V5 V6 Cnc 40mm 3d Touch Probe Edge Finder To Find The Center Desktop Cnc Probe Formach3 And Grbl Gr

  • Märke: Unbranded
Pris: 2 299,00 kr
Säljs av:
2 299,00 kr
+ 117,49 kr Leverans

I lager

Vi erbjuder följande betalsätt

Beskrivning

1.Clamp the probe on the machine spindle through the tool holder, and loosen it slightly.The two opposite fastening screws at the bottom can adjust the four symmetrical adjustment tops on the side.The ball head of the wire adjustment probe coincides with the center of the spindle. 2.There is no need to rotate the spindle when measuring the centering, and the centering measurement can make the probe rotate Turn 180 to make the measurement more accurate. 3.The probe supports measurement in three directions, X, Y, and Z, with reciprocating positioning accuracy less than 0.01, X Y deflection range 0-6,Z direction telescopic range 1mm, exceeding Leaving the safe range will damage the probe and probe. 4.The probe has two built-in CR1616 3V lithium button batteries(not include),Loosen the fastening screw and adjusting top wire when it is insufficient, remove the top cover to replace it,Pay attention to the positive and negative poles of the battery when replacing, and re-adjust the probe center position after replacement Set. 5.The side head does not support the detection of insulating materials and insulated machine bed. Name:The photoelectric 3D edge finder The probe supports dust and a small amount of dripping and water resistance, do not drip for a long time Dimensions: repeat positioning 0.01,Z direction stroke 1mm, XY swing about 6 degrees. Probe thread , ball head diameter 4mm, length 40mm. The detection of insulating materials and insulating spindles is not supported. Power Suplly:two CR1616 3V lithium button batteries(without battery) Type:Red Light Colour:Gray Material:aluminum alloy Package Contents: 1 * 3d photoelectric edge finder Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo-ID: 332074737-732098415
  • EAN: 7900993638781

Produktsäkerhetsinformation

Se produktsäkerhetsinformationen som är specifik för denna produkt som beskrivs nedan

Följande information tillhandahålls av den oberoende tredjepartsåterförsäljaren som säljer denna produkt.

Produktsäkerhetsetiketter

CE Mark
Säkerhetsvarningar: Please read the instructions and precautions before use
Ingredienser: 90% plastic and 10% metal

Leverans och returer

Skickas inom 14 dagar

  • STANDARD: 117,49 kr - Leverans mellan kl tis 21 oktober 2025–tis 28 oktober 2025

Leverans från Kina.

Vi gör vårt bästa för att säkerställa att produkterna du beställer levereras kompletta och enligt dina specifikationer. Om du däremot skulle ta emot en ofullständig beställning, eller andra artiklar än de du beställt, eller om det finns någon annan anledning till att du inte är nöjd med din beställning, kan du returnera beställningen, eller valfria produkter som ingår i beställningen, och få fullständig ersättning för artiklarna. Visa fullständig returpolicy