Item Type: Water Conductivity Sensor <br>Signal Adapter Board: <br>Input Voltage: DC3.3~5.5V <br>Output Signal: 0~2.3V <br>Working Current: 3~6mA <br>Measurement Range: 0~1000ppm <br>Measurement Accuracy: ±10% F.S. (25℃) <br>Size: Approx. 42 x 32mm / 1.7 x 1.3in <br>Module Interface: XH2.54-3P <br>Electrode Interface: XH2.54-2P <br>Probe: <br>Number of Probes: 2 <br>Overall Length: Approx. 83cm / 32.7in <br>Connection Interface: XH2.54-2P <br>Color: White <br>Other: Waterproof probe <br>Product Introduction: <br>This equipment can be used for the measurement of general household water quality. <br>Generally, the tap water is within 100 and the purified water is within 10. <br>The compatible sensor is used to measure the value of water. The value can reflect the cleanliness of water and can be applied to water quality testing in the fields of domestic water and hydroponics. <br>(Total Dissolved Solids): Indicates how many milligrams of dissolved solids are dissolved in 1 liter of water. In general, the higher the value, the more lysate is contained in the water and the more unclean the water. Therefore, the size of the can be used as one of the basis for reflecting the cleanliness of the water. <br>The commonly used testing equipment is a pen. Although it is inexpensive and easy to use, it cannot transmit data to the control system, do long-term online monitoring, and analyze the water quality. Using a special instrument, although the data can be transmitted, the accuracy is high, but the price is very expensive. To this end, we have specially introduced this compatible sensor, which can be used to measure the value of water after connecting to the controller. <br>this product is plug and play and easy to use. The wide voltage supply of 3.3~5.5V and the analog signal output of 0~2.3V make this product compatible with 5V, 3.3V control system, which can be easily used in the ready-made control system. The excitation source used for measurement uses an AC signal, which can effectively prevent probe polarization, extend probe life, and increase the stability of the output signal. The probe is a waterproof probe that can be immersed in water for long periods of time. <br>The product can be applied to water quality testing in the fields of domestic water, hydroponics and the like. With this sensor, you can easily DIY a detector, and easily check the cleanliness of the water to make your water quality better.<br>1、Strong compatibility and easy to connect, plug and play, no welding required. <br>2、Using waterproof probe, can be immersed in water for a long time, very practically. <br>3、With excitation source is AC signal, effectively preventing probe polarization. <br>4、Convenient to use and with good performance, with small size, easy to carry and store. <br>5、Great workmanship, perfect replacement for the old one and has a long service life.1.TDS probes cannot be used in water above 55 °C. <br>2.The probe should not be placed too close to the edge of the container, as it will affect the display. <br>3.The head and lead of the probe are waterproof and can be immersed in water, but the connection interface and the signal adapter board are not waterproof. Please pay attention to use.1 x Water Conductivity Sensor