MPPT Wind Charge Controller 800W for 12/24V Generator Systems

Wind Generator Controller 12/24V 800W MPPT Wind Charge Controller for Wind Turbine Systems Automatically charges the battery. Features an integrated rectifier and brake circuit module, offering improved heat dissipation and reliability compared to traditional designs. Fully sealed waterproof design with IP67 protection rating, allowing long-term normal operation even when submerged in water. Note: Ensure the wind turbine generator output voltage matches the battery's rated voltage. Connect wires in the correct order: first connect the battery's positive and negative terminals, then connect the three-phase output from the wind turbine. Connect the battery and wind turbine to the controller as instructed. Reversing polarity or incorrect connections may cause system malfunction or permanent damage to the controller. Wiring Instructions: 1. Connect the battery's positive and negative terminals to the corresponding red (positive) and black (negative) battery terminals on the controller. 2. Connect the wind turbine's three-phase output to the three-phase input (green wires) on the controller. Specifications: - Maximum input AC voltage: AC35V - Output voltage: 12V / 24V - Battery charging cut-off voltage: 14.5V ±0.3V / 29V ±0.3V - Maximum charging current: 15A (12V), 10A (24V) - Wind generator speed limit voltage: 14.5V ±0.3V / 29V ±0.3V - Protection level: IP67 - Static power consumption: 0.008A - Maximum load power: 800W - Maximum bearing wind speed: 12 m/s - Operating temperature range: -35°C to 65°C - Input wiring: Three-wire system - Control mode: Compatible with 12V and 24V systems - Installation: Bolted mounting - Do not reverse positive and negative terminals to prevent damage to the controller. Application: Wind charge controller Color: Blue Material: Aluminum alloy Package Contents: 1 x MPPT Wind Generator Controller Note: The package includes only the items listed above. Other accessories are not included. Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error allowance: +/- 1-3 cm.