Programmable Thermostat with Sensor, 2 Relay Output, DIN Rail Mount

Standard 2 Relay Output Din Rail Thermostat with Sensor, -40°C to 110°C Temperature Range, High/Low Temperature Alarm, NO/NC/COM Relay Outputs, 7A/250VAC, AC90-260V Power Supply Features: - Strong anti-interference capability, stable performance, simple circuit design, and high accuracy - Enclosure designed for DIN rail mounting, easy installation, and sleek appearance - Includes adjustment function and digital filtering - Dual relay output with contact capacity of 7A/250VAC Specifications: - Power Supply: AC90–260V (power consumption <2W; other voltages available on request) - Measurement Accuracy: ±0.5% FS - Temperature Range: -40°C to 110°C - Display: 0.36-inch high-brightness red LED (other colors available on request) - Operating Environment: -10°C to 60°C, relative humidity below 80% - Dimensions: 110 x 36 x 60 mm - Sensor Cable Length: 1.5 meters Package Includes: - 1 x DIN Rail Thermostat - 1 x Temperature Sensor Function Codes: - TY1: Relay 1 Alarm Type 0: Upper limit alarm – Relay closes at AL1 temperature, opens at (AL1 – HY1) 1: Lower limit alarm – Relay closes at AL1 temperature, opens at (AL1 + HY1) 2: Upper and lower limit alarm – Relay closes above AL1 and below (AL1 – HY1), opens between AL1 and HY1 - AL1: Relay 1 Set Point (-40.0 to 130.0°C) - HY1: Relay 1 Hysteresis (-40.0 to 130.0°C) - TY2: Relay 2 Alarm Type 0: Upper limit alarm – Relay closes at AL2 temperature, opens at (AL2 – HY2) 1: Lower limit alarm – Relay closes at AL2 temperature, opens at (AL2 + HY2) 2: Upper and lower limit alarm – Relay closes above AL2 and below (AL2 – HY2), opens between AL2 and HY2 - AL2: Relay 2 Set Point (-40.0 to 130.0°C) - HY2: Relay 2 Hysteresis (-40.0 to 130.0°C) - SEC: Relay Action Delay (0–999 seconds) – Delay applied when AL1 or AL2 conditions are met; 0 = no delay - LC: Temperature Calibration Offset (-20.0 to 20.0°C) – Displayed value = measured value + LC